Kluberbio LG 39-701 N

Manufacturer: KLÜBER LUBRICATION (Germany)

Eco-compatible operating lubricant for open gear drives
Kluberbio LG 39-701 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces.
The high-viscosity base oil of Kluberbio LG 39-701 N comes from 100 % renewable resources.
Kluberbio LG 39-701 N complies with the 2013 Vessel General Permit requirements of the Environmental Protection Agency (EPA) in terms of biodegradability, minimal toxicity and bio-accumulation to be met by Environmentally Acceptable Lubricants.
Due to the lubricant's excellent low-temperature behaviour, it can be pumped in centralised lubricating systems down to -30°C and sprayed even below 0°C. These positive product characteristics enable you to use the lubricant over a wider temperature range than is common with mineral-oil-based greases of the same base oil viscosity.

Benefits for your application

Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 GP (Vessel General Permit)
Lower environmental impact in the event of leakage. The base oil consists of renewable raw materials and is ultimately biodegradable
Good low-temperature behaviour enables operation of open gear drives in cold conditions
Selected additives ensure longer component life and reduced wear
Cost reduction due to low consumption when applied by selected spraying systems
Meets requirements for OSPAR conformance, including Norway Yellow 1, Denmark (registration number 2486711) and Cefas E (registration number 27078)

Orther products

Product

Features, Application

Klubersynth AG 14-61

Light-coloured special lubricant for open drives
Klubersynth AG 14-61 has been especially designed for girth gear/pinion drives and plain bearings in wind turbines. The lubricant is resistant to high loads and provides very good corrosion protection properties. It can be used in a wide service temperature range and is therefore pumpable at temperatures as low as minus 30°C. The grease offers good pressure and wear resistance and is free from inorganic solid lubricants like MoS2 and graphite. Due to its good compatibility with commercial sealing materials Klubersynth AG 14-61 is suitable for wide ranging applications.

Kluberplex AG 11-462

White operating and priming lubricants
Kluberplex AG 11- 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components.
These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.

Kluberplex 34-131 N

Speciality rolling bearing grease for demanding applications
In wind turbine generators, the lifetime of rolling bearings and service intervals can be extended with the right lubricant. Kluberplex BEM 34-131 N is a long-term lubricating grease offering high load-carrying capacity and very good corrosion protection. Also during downtime. Kluberplex BEM 34-131 N enables long grease life and is compatible with various lubrication systems.

Kluberquiet BQH 72-102

High-purity rolling bearing grease for long-term lubrication
Kluberquiet BQH 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, Kluberquiet It is a rolling bearing grease with a particularly low noise level. It offers excellent performance characteristics thanks to a high-quality ester oil, a new polyurea thickener and special additives. It is special in that it combines high-temperature resistance and extreme purity.

Kluberplex BEM 41-141

Lubricant for rolling and plain bearings subject to high loads
Kluberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite.
Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.

Klubersynth BZ 68-400

Special cleaning grease for rolling bearing applications
For you as an operator of wind power plants, downtime means high costs and laborious maintenance. Downtime is often due to rolling bearing damage caused by hardened residues. Klubersynth BZ 68-400 is a solution destined precisely for this problem. As the cleaning grease removes these residues, bearing life is extended and downtime for maintenance reduced.
When developing Klubersynth BZ 68-400, particular care was taken to ensure it is compatible with other base oils for maximum versatility. Besides the good cleaning effect that removes residues from rolling bearings, Klübersynth BZ 68-400 offers good protection against wear and corrosion. Due to this combined effect, cleaning of the rolling bearings can take place during operation.

Technical service

Supervising installation of Aumund equipment

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: [email protected]

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416